在郴州酒店晚上怎么叫服务

Company news

Where you are now: home page  >  news information  >  Company news

Characteristics and application scope of double flange force transfer joint

The lateral displacement of the flange or multiple directions is compensated by the sphere Telescopic device Should be used in pairs, single spherical Compensator It has no compensation ability and can be used as universal joint of pipeline.

Double flange Force transfer joint It is mainly formed by adding flange short pipe and force transmission screw on the basis of flange loose sleeve compensation joint. The difference between sub type compensation joint and loose sleeve compensation joint is that its compensation amount refers to the adjustment amount in the process of installation and disassembly. Once all the nuts are tightened, it is rigid connection and can transmit axial force, so as to protect valves and pumps Preparation.

C2F double flange force transfer joint is mainly applicable to the pipeline with both sides connected with flange. When installing, adjust the installation length of both ends of the product and flange, and tighten the pressure bolts evenly in diagonal order to make it become a whole with certain displacement. It is convenient to adjust according to the field size during installation and maintenance. During operation, the axial thrust can be transmitted to the whole pipeline.

CF type single flange force transfer joint is mainly used to connect one side with flange and one side to pipe welding. During installation, adjust the installation length of both ends of the product and the pipe or flange. After installation and welding, tighten the gland bolts evenly in diagonal order to make it a whole, with certain displacement, which is convenient for installation and maintenance, and can be adjusted according to the site size. The axial thrust can be transmitted to the whole pipe during operation.

Application range of force transfer joint:

The double flange force transmission joint is mainly used to transport seawater, fresh water, cold and hot water, drinking water, domestic sewage, crude oil, fuel oil, lubricating oil, product oil, air, gas, steam and particle powder with temperature not higher than 250 ℃.

Shanghai Huanjing is mainly engaged in the research and development of transmission joints, double flange transmission joints and other force transmission joints. The double flange force transfer joint is mainly applicable to the pipeline with both sides connected with the flange. During installation, the installation length of both ends of the product and the flange is adjusted, and the pressure bolts are uniformly tightened diagonally in order to make it a whole, with a certain amount of displacement. It is convenient to adjust according to the field size during installation and maintenance. During operation, the axial thrust can be transmitted to the whole pipeline.

 36.jpg  

Back to list

Related information

  •  What are the main parts of double flange force transfer joint
    thirty
    May

    What are the main parts of double flange force transfer joint

    The double flange is composed of loose sleeve, short pipe flange, force transmission screw and other components. It can transmit the pressure and thrust of the connected parts and compensate the pipeline deviation, and can not absorb the axial displacement. Key for loose sleeve connection of pump, valve, pipeline and other accessories. Adjust both sides of the product during installation

  •  Force transfer joint in daily life and industrial production
    twenty-nine
    May

    Force transfer joint in daily life and industrial production

    The force transfer joint can also be called double flange force transfer joint or expansion joint (expansion joint). From its name, we can see that it is mainly used for structural reinforcement, pump, gate valve and other small objects and pipeline connection. This kind of force transfer joint can transfer force from one

  •  How to use single flange force transfer joint in welding
    twenty-eight
    May

    How to use single flange force transfer joint in welding

    Different power single flange force transfer joint welding temperature, because of the heat conduction needs a certain time, so that each point is in different time to high temperature point. However, in the general welding process, welding forms a metallurgical process, and the metal area adjacent to the welding slit corresponds to No

  •  Double flange force transfer joint is connected by diagonal method
    twenty-seven
    May

    Double flange force transfer joint is connected by diagonal method

    Double flange force transfer joint is used for loose sleeve connection of pump, valve and other accessories. The double flange loose sleeve force transmission joint is composed of loose sleeve expansion joint, short pipe flange, force transmission screw and other components. It can transmit the working pressure torque (blind plate force) of the connected parts and compensate the pipeline error

  •  Importance of double flange force transfer joint for drinking water pipeline
    twenty-six
    May

    Importance of double flange force transfer joint for drinking water pipeline

    When installing the water inlet pipe, a pipe material will be used, which is the double flange force transfer joint. What are the functions of the double flange force transfer joint in the installation of drinking water pipeline? Under the ring static pipeline equipment network for you to interpret some of the relevant professional knowledge

  •  What can be applied to single flange limited expansion joint
    twenty-five
    May

    What can be applied to single flange limited expansion joint

    After decades of development, domestic single flange limited expansion joint manufacturers have already formed a large industrial scale. The factory and production process have also been greatly improved. On the whole, the industry is happy with the future development prospect of the single flange limited expansion joint industry

contact us

021-6999-0533

T-66, 2nd floor, No.18, Lane 945, changta Road, Shihudang Town, Songjiang District, Shanghai

Focus on us

© 20010-2020 Shanghai Huanjing Shock Absorber Co., Ltd  All Rights Reserved.  Hu ICP Bei No. 16048943