在郴州酒店晚上怎么叫服务

Company news

Where you are now: home page  >  news information  >  Company news

Solution of engineering problems by force transfer joint

    Force transfer joint It has the function of compensating displacement. When using, the force transfer joint and pump, valve and other equipment are connected together by using full bolts. If the pipeline requirements cannot be met, the adjustment can be made according to the specific installation size. The axial thrust can be transmitted back to the whole pipe during operation. This not only improves the work efficiency, but also plays a protective role on the pump, valve and other equipment.

In order to compensate the displacement of products, it should be widely used in construction. Therefore, in the construction project, if we want to use products, we should consider all aspects.

At present, there are many problems in the construction of water supply and drainage: for example, the square or round pipes required for water transmission and distribution, as well as pipe fittings and valves, are generally of poor quality and materials. It can not meet the requirements of the construction industry product standards formulated by the relevant domestic departments. Moreover, the water terminal does not use special water-saving materials and appliances at all. Building water-saving is also a key technology. The design of water-saving nozzles and water-saving system all lead to the high pressure of some water points, and the imbalance of cold and hot water supply pressure. The circulation effect of hot water pipe network is very poor.

The effect of force transfer joint can solve the problem of construction engineering. So what is the performance of the force transfer joint?

Good self sealing effect, the sealing effect depends on the pressure of the medium in the pipeline on the rubber ring, when the flange is connected. The higher the pressure is, the axial movement of the pipeline is allowed, which can comply with the expansion and contraction of the pipeline. In order to guard against the leakage of medium when there is no pressure, the rubber ring has a pre tightening force on the end pipe interface. After the steel pipe is connected. The radial force is far less than the axial force. The pipe connection is in a flexible state. There is a gap between the clamp and the pipe end. The more prominent the advantages are, the rubber ring connection between the pipes is realized. The higher the pressure, compared with the flange. It can be used to alert the leakage of the medium without pressure, and the situation of the clamp with high stress strength is equivalent to that of the pressure vessel.

Since its establishment, Shanghai Huanjing pipeline equipment Co., Ltd. has always adhered to the business philosophy of "taking science and technology as the guide, regarding quality as life, and regarding users as God", adhering to the product quality policy of striving for improvement, and specializing in R & D and production of various products and equipment. Our company adheres to the enterprise spirit of "innovation, excellence, unity and dedication", casting a batch of high-quality and excellent performance products, which have been unanimously praised by new and old customers.

 9.jpg  

Back to list

Related information

  •  What are the main parts of double flange force transfer joint
    thirty
    May

    What are the main parts of double flange force transfer joint

    The double flange is composed of loose sleeve, short pipe flange, force transmission screw and other components. It can transmit the pressure and thrust of the connected parts and compensate the pipeline deviation, and can not absorb the axial displacement. Key for loose sleeve connection of pump, valve, pipeline and other accessories. Adjust both sides of the product during installation

  •  Force transfer joint in daily life and industrial production
    twenty-nine
    May

    Force transfer joint in daily life and industrial production

    The force transfer joint can also be called double flange force transfer joint or expansion joint (expansion joint). From its name, we can see that it is mainly used for structural reinforcement, pump, gate valve and other small objects and pipeline connection. This kind of force transfer joint can transfer force from one

  •  How to use single flange force transfer joint in welding
    twenty-eight
    May

    How to use single flange force transfer joint in welding

    Different power single flange force transfer joint welding temperature, because of the heat conduction needs a certain time, so that each point is in different time to high temperature point. However, in the general welding process, welding forms a metallurgical process, and the metal area adjacent to the welding slit corresponds to No

  •  Double flange force transfer joint is connected by diagonal method
    twenty-seven
    May

    Double flange force transfer joint is connected by diagonal method

    Double flange force transfer joint is used for loose sleeve connection of pump, valve and other accessories. The double flange loose sleeve force transmission joint is composed of loose sleeve expansion joint, short pipe flange, force transmission screw and other components. It can transmit the working pressure torque (blind plate force) of the connected parts and compensate the pipeline error

  •  Importance of double flange force transfer joint for drinking water pipeline
    twenty-six
    May

    Importance of double flange force transfer joint for drinking water pipeline

    When installing the water inlet pipe, a pipe material will be used, which is the double flange force transfer joint. What are the functions of the double flange force transfer joint in the installation of drinking water pipeline? Under the ring static pipeline equipment network for you to interpret some of the relevant professional knowledge

  •  What can be applied to single flange limited expansion joint
    twenty-five
    May

    What can be applied to single flange limited expansion joint

    After decades of development, domestic single flange limited expansion joint manufacturers have already formed a large industrial scale. The factory and production process have also been greatly improved. On the whole, the industry is happy with the future development prospect of the single flange limited expansion joint industry

contact us

021-6999-0533

T-66, 2nd floor, No.18, Lane 945, changta Road, Shihudang Town, Songjiang District, Shanghai

Focus on us

© 20010-2020 Shanghai Huanjing Shock Absorber Co., Ltd  All Rights Reserved.  Hu ICP Bei No. 16048943