在郴州酒店晚上怎么叫服务

Industry trends

Where are you now: home page  >  news information  >  Industry trends

How to use single flange force transfer joint in welding

Different power single flange Force transfer joint The welding temperature, because of the heat conduction needs a certain time, promotes each point to arrive at the high temperature point at different time. However, in the general welding process, the welding forms the metallurgical process, and the metal area adjacent to the welding slit corresponds to the heat treatment of different specifications, which will have relative changes in microstructure and characteristics.
When the power transmission joint is welded, the welding crystallization begins to grow from the bottom of the bottom wall of the tank. As the cooling rate of each mold is different. The starting point of melting bath zone with low melting point from sulfur, phosphorus and other impurities and iron is easy to concentrate in the welding area. The isolation material will affect the mechanical properties of double flange transmission joint. When the heat affected zone of double boss welded joint, the sealing property of pipeline with greater force transfer refers to the mechanical properties of the area on both sides of the weld metal near the weld according to the effect of heat. Because of the different points, in which the heat near the heat affected zone can be divided into the melting zone and the overheated zone, the region and the partial normalizing phase transition zone. The welding melting zone is connected with the conventional metal. This area is also called semi melting area because it is between the solidus temperature and liquidus temperature of the part of the plate during welding. At this time, the melting has condensed into the molten metal in the forging metal mechanism. When the heating temperature is too high, the strong crystallization will be formed. When the joint is welded with low carbon double carbon, the melting zone will be formed For flange transmission, although the welding area is small (0.1-1 mm), due to the decrease of strength and toughness, and the change of the joint surface above will cause stress, the definite characteristics of fusion zone of welded joint are at a large level.
The above is the actual regulations and specifications of welding single flange force transfer joint. I will introduce you to the problems that you are more worried about: if you can use the force transfer joint according to the use specification and the specification of the force transfer joint, plus the joint force of the enterprise can produce the standard, quality and stability, there is no need to worry about the problem. It can only operate according to the specifications and precautions, which is very stable.

Back to list

Related information

  •  What are the main parts of double flange force transfer joint
    thirty
    May

    What are the main parts of double flange force transfer joint

    The double flange is composed of loose sleeve, short pipe flange, force transmission screw and other components. It can transmit the pressure and thrust of the connected parts and compensate the pipeline deviation, and can not absorb the axial displacement. The key parts such as valves and pipes are loose. Adjust both sides of the product during installation

  •  Power transmission in industrial life
    twenty-nine
    May

    Power transmission in industrial life

    The force transfer joint can also be called double flange force transfer joint or expansion joint (expansion joint). From its name, we can see that it is mainly used for structural reinforcement, pump, gate valve and other small objects and pipeline connection. This kind of force transfer joint can transfer force from one

  •  How to use single flange force transfer joint in welding
    twenty-eight
    May

    How to use single flange force transfer joint in welding

    Different power single flange force transfer joint welding temperature, because of the heat conduction needs a certain time, so that each point is in different time to high temperature point. However, in the general welding process, welding forms a metallurgical process, and the metal area adjacent to the welding slit corresponds to No

  •  Double flange force transfer joint is connected by diagonal method
    twenty-seven
    May

    Double flange force transfer joint is connected by diagonal method

    Double flange force transfer joint is used for loose sleeve connection of pump, valve and other accessories. The double flange loose sleeve force transmission joint is composed of loose sleeve expansion joint, short pipe flange, force transmission screw and other components. It can transmit the working pressure torque (blind plate force) of the connected parts and compensate the pipeline error

  •  Importance of double flange force transfer joint for drinking water pipeline
    twenty-six
    May

    Importance of double flange force transfer joint for drinking water pipeline

    When installing the water inlet pipe, a pipe material will be used, which is the double flange force transfer joint. What are the functions of the double flange force transfer joint in the installation of drinking water pipeline? Under the ring static pipeline equipment network for you to interpret some of the relevant professional knowledge

  •  What can be applied to single flange limited expansion joint
    twenty-five
    May

    What can be applied to single flange limited expansion joint

    After decades of development, domestic single flange limited expansion joint manufacturers have already formed a large industrial scale. The factory and production process have also been greatly improved. On the whole, the industry is happy with the future development prospect of the single flange limited expansion joint industry

contact us

021-6999-0533

T-66, 2nd floor, No.18, Lane 945, changta Road, Shihudang Town, Songjiang District, Shanghai

Focus on us

© 20010-2020 Shanghai Huanjing Shock Absorber Co., Ltd  All Rights Reserved.  Hu ICP Bei No. 16048943